Ubuntu Dapper Drake 6.06 amd64 and Windows XP in Xen 3.0
I am coming from a bloody week of wrestling against packages, bugs and "make world"s trying to run Xen in Ubuntu 6.06 amd64 on an AM2 3800+ and to make a Windows XP Pro domU.
I searched on the web some resources that would explain how to run Windows on Xen and I found some very good tutorial that unfortunately don't fit exactly my configuration and my purpose. These are the sites I took as a basis for my setup:
- dom0 = Debian Sarge 3.1, domU = Debian Sarge, Xen 2.0.7 32 bit installed from binaries or source, paravirtualization
- dom0 = SUSE 10.1, domU = Win XP Pro, Xen 3.0.2, Intel VT hardware virtualization
- dom0 = Ubuntu 6.06, domU = Ubuntu, Xen 3.0.1 32 bit
- dom0 = Kubuntu Dapper Drake, domU = Win XP, Xen 3.0.2-2 32 bit, AMD SVM hardware virtualization
These are all the steps I did and the problems I encountered during this Calvary :-) (I come from Windows with a little linux/unix background):
Note: All the shell commands are executed as root.
- Remove unnecessary and maybe problematic packages and install required packages:
apt-get remove exim4 exim4-base lpr nfs-common portmap pidentd pcmcia-cs apt-get install screen ssh debootstrap python python-twisted-core iproute bridge-utils libcurl3-dev libncurses-dev
- I installed also python-dev with Synaptic because apt-get didn't find it
- Xen requires also these packages:
- dev86: I compiled bin86-0.16.17.tar.gz sources but it's the same as installing bin86 using Synaptic or apt-get
- sdl and sdl-dev: I compiled SDL-1.2.11 sources because Synaptic and apt-get was reporting a dependency error installing libsdl1.2-dev package (see Ubuntu forum)
- libvncserver: I compiled LibVNCServer-0.8.2 and x11vnc-0.8.2 because I didn't find libvncserver with Synaptic or apt-get; I also installed libvncserver-dev using apt-get
ubuntu-6.06.1-server-amd64(Thank you Nicholas!):
apt-get install libncurses5-dev libncurses5 zlib1g-dev python python-dev python-twisted-core openssl libssl-dev bridge-utils iproute libcurl3 libcurl3-dev bzip2 module-init-tools tetex-base tetex-extra transfig tgif build-essential libsdl1.2-dev libvncserver-dev mercurial libjpeg-dev qemu bcc bin86
- I also installed qemu because I wasn't getting Xen working and I read somewhere to try loading the guest with qemu to check if the problem is in Xen configuration or elsewhere. I don't know if qemu must be installed for Xen to work because I installed qemu, libsdl and libvncserver together and then recompiled Xen; I suppose it's not required because I didn't find any source listing qemu in Xen requirements.
- Get Xen 3.0-testing sources.
Don't install Xen 3.0.2 binaries (it doesn't install hvmloader) and don't build Xen 3.0.2 sources (there's a Makefile issue regarding hvmloader and 64-bit). See the troubleshooting section for more info.
Install mercurial (a distributed version control system) and get xen-3.0-testing:
# apt-get install mercurial # cd /usr/src/ # hg clone http://xenbits.xensource.com/xen-3.0-testing.hg
- Compile the sources (during this process the last kernel will eventually be downloaded from kernel.org):
# cd xen-3.0-testing.hg # LANG=C; export LANG # make world # make installThe
LANG=C; export LANGis necessary on my system because there's a bug in
ddthat generates a "segmentation fault" error (see Ubuntu forum)
At the end I got these files in /boot directory:
-rw-rw-r-- 1 root root 829323 Aug 12 22:32 System.map-18.104.22.168-xen -rw-rw-r-- 1 root root 55292 Aug 12 22:32 config-22.214.171.124-xen -rw-r--r-- 1 root root 7239478 Aug 12 22:32 vmlinux-syms-126.96.36.199-xen lrwxrwxrwx 1 root root 21 Aug 12 22:32 vmlinuz-2.6-xen -> vmlinuz-188.8.131.52-xen lrwxrwxrwx 1 root root 21 Aug 12 22:32 vmlinuz-2.6.16-xen -> vmlinuz-184.108.40.206-xen -rw-r--r-- 1 root root 1646379 Aug 12 22:32 vmlinuz-220.127.116.11-xen -rw-r--r-- 1 root root 251370 Aug 12 22:30 xen-3.0.2-3.gz lrwxrwxrwx 1 root root 14 Aug 12 22:30 xen-3.0.gz -> xen-3.0.2-3.gz lrwxrwxrwx 1 root root 14 Aug 12 22:30 xen-3.gz -> xen-3.0.2-3.gz -rw-r--r-- 1 root root 3190960 Aug 12 22:30 xen-syms-3.0.2-3 lrwxrwxrwx 1 root root 14 Aug 12 22:30 xen.gz -> xen-3.0.2-3.gz
- Following the tutorials above I should do
# mv /lib/tls /lib/tls.disabledbut I don't have tls, so I skipped this step.
On Ubuntu 6.06 i386 I have /lib/tls, so I moved it.
# /sbin/depmod -a 2.6.16-xenIn /lib/modules I got the directory 2.6.16-xen (18.104.22.168-xen was created when installing xen)
On Ubuntu 6.06 i386 I did
/sbin/depmod -a 22.214.171.124-xenbecause in /lib/modules I only have 126.96.36.199-xen
- Edit /etc/mkinitramfs/modules:
- Create an initrd image:
# cd /boot # mkinitramfs -o initrd.img-188.8.131.52-xen 184.108.40.206-xen # ln -sf initrd.img-220.127.116.11-xen initrd.img-2.6-xenI got /boot/initrd.img-18.104.22.168-xen and initrd.img-2.6-xen.
On Ubuntu 6.06 i386 I only got initrd.img-22.214.171.124-xen and I symlinked it with
ln -s initrd.img-126.96.36.199-xen initrd.img-2.6-xen.
- Add in /boot/grub/menu.lst before or after automagical section:
title Xen 3.0 / XenLinux 2.6 kernel /boot/xen-3.gz dom0_mem=1024000 module /boot/vmlinuz-2.6-xen root=/dev/sda1 ro module /boot/initrd.img-2.6-xen/ is on the first partition of my SATA disk (/dev/sda1) and I told Xen to use 1 GB of the 2 GB of RAM available.
grub-install /dev/sdabecause I want grub in my first disk's MBR.
- Start xend and xendomains at boot. I did:
# update-rc.d xend start 30 2 3 4 5 . stop 31 0 1 6 . Adding system startup for /etc/init.d/xend ... /etc/rc0.d/K31xend -> ../init.d/xend /etc/rc1.d/K31xend -> ../init.d/xend /etc/rc6.d/K31xend -> ../init.d/xend /etc/rc2.d/S30xend -> ../init.d/xend /etc/rc3.d/S30xend -> ../init.d/xend /etc/rc4.d/S30xend -> ../init.d/xend /etc/rc5.d/S30xend -> ../init.d/xend # update-rc.d xendomains start 31 2 3 4 5 . stop 30 0 1 6 . Adding system startup for /etc/init.d/xendomains ... /etc/rc0.d/K30xendomains -> ../init.d/xendomains /etc/rc1.d/K30xendomains -> ../init.d/xendomains /etc/rc6.d/K30xendomains -> ../init.d/xendomains /etc/rc2.d/S31xendomains -> ../init.d/xendomains /etc/rc3.d/S31xendomains -> ../init.d/xendomains /etc/rc4.d/S31xendomains -> ../init.d/xendomains /etc/rc5.d/S31xendomains -> ../init.d/xendomains
- Another workaround for a problem with udev (see Ubuntu forum):
# mv /etc/udev/rules.d/xen-backend.rules /etc/udev/rules.d/92-xen-backend.rules
- Edit /etc/init.d/xend after "/proc/xen/capabilities":
if [ ! -d /var/run/xend ] ; then mkdir -p /var/run/xend fi if [ ! -d /var/run/xenstored ] ; then mkdir -p /var/run/xenstored fi
- Edit /etc/init.d/xendomains:
Now I rebooted and at grub menu I chose Xen 3.0 / XenLinux 2.6, and I logged in exactly as I did before in Ubuntu.
I got no errors, so I checked if Xen was running:
# xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 995 2 r----- 107.5dom0 (Xen) was running and using 1 GB of memory.
To run Windows from Xen using Pacifica (SVM) hardware virtualization, first check if the cpu supports it and if it's enabled:
# cat /proc/cpuinfo | grep svm flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy flags : fpu tsc msr pae mce cx8 apic mtrr mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8_legacy # xm dmesg | grep SVM (XEN) AMD SVM Extension is enabled for cpu 0. (XEN) AMD SVM Extension is enabled for cpu 1.
These are the steps I did to create a Windows XP domU domain:
- Create Xen image for Windows XP:
# LANG=C; export LANG # mkdir /vserver/xen-images # cd /vserver/xen-images # dd if=/dev/zero of=winxp.img bs=1k seek=20480k count=1 1+0 records in 1+0 records out 1024 bytes (1.0 kB) copied, 9.3e-05 seconds, 11.0 MB/s # dd if=/dev/zero of=winxp.img bs=1k count=1 conv=notrunc 1+0 records in 1+0 records out 1024 bytes (1.0 kB) copied, 6.7e-05 seconds, 15.3 MB/sI haven't put the
export LANG=Cinto my .bashrc yet.
/vserver is the mount point of the ext3 partition I reserved to Xen images (25 GB).
ddcommands create a zeroed file that's large bs * 1024 * seek * 1024 bytes (20 GB).
- Configure Xen image to start Windows XP:
# mkdir /etc/xen/vm # cp /etc/xen/xmexample.hvm /etc/xen/vm/winxp.hvmand make these changes to /etc/xen/vm/winxp.hvm:
name = "winxp" memory = 512 disk = [ 'file:/vserver/xen-images/winxp.img,ioemu:hda,w' ] on_poweroff = 'destroy' on_reboot = 'destroy' on_crash = 'destroy' cdrom='/dev/hdb' boot='d' sdl=1 vnc=0 vncviewer=0
- Create Windows XP guest:
# cd /etc/xen/vm # xm create winxp.hvm Using config file "winxp.hvm". Started domain winxpImmediately a window opened showing Windows setup:
Check the status:
root@am2:/etc/xen/vm# xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 1000 2 r----- 1139.5 winxp 13 512 1 ------ 18.9
- When Windows setup has finished, launch again
xm create winxp.hvm: a window with initial configuration should appear and Windows should start.
TroubleshootingHere are some problems I encountered and the relative solutions, where available.
dd problemIf when doing a
ddcommand, like in
dd if=/dev/zero of=winxp.img bs=1k seek=20480k count=1you get something like
1+0 records in 1+0 records out Segmentation faultyou may have a malfunctioning
dd: it seems there's a bug in the version coming with Ubuntu Dapper Drake 6.06 for amd64 (see for example Ubuntu forum).
Try these solutions:
LANG=C; export LANGbefore executing
LANG=C dd if=....
ddfrom another distribution (I tried debian coreutils_5.97-3_amd64 but it didn't solved)
- I tried also this command, as I read here, but in my case it didn't solved:
# touch /usr/share/locale-langpack/en/LC_MESSAGES/coreutils.mo
- If you ignored the "Segmentation fault" errors and created the void image for domU with
dd if=/dev/zero of=/...maybe you got this error doing
xm create ...:
Error: Kernel image does not exist: /usr/lib/xen/boot/hvmloader
- Compiling of the sources will stop at a
SATA disk problemIf
xm creategives an error like this:
Using config file "winxp.hvm". Error: hvm: for qemu vbd type=file&dev=hda~hddand in the xen image configuration file ("winxp.hvm") the
disk=line is like
disk = [ 'file:/vserver/xen-images/winxp.img,ioemu:sda,w' ](note the
ioemu:sda), try changing to
ioemu:hda; maybe there's a problem with the sata_nv driver in Xen kernel (see here).
hvmloader missing in xen-3.0.2-install-x86_64.tgzI downloaded xen-3.0.2-install-x86_64.tgz, run install.sh, configured all the files and at the end just as I launched
xm create winxp.hvmI got this error:
Error: No kernel specifiedI did not have any file called hvmloader in the directory specified, and after some search I found that file in a deb package that's not available for amd64, so I decided to make Xen from sources
32-bit hvmloader problem with xen-3.0.2-src.tgzI got xen-3.0.2-src.tgz using torrent, compiled, installed, tried many configurations, and every time I was launching
xm create winxp.hvmI was getting an immediate hard reset (and I also lost my swap partition, I had to do
I checked hvmloader with
# file /usr/lib/xen/boot/hvmloader /usr/lib/xen/boot/hvmloader: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linked, not strippedand I saw it was a 32-bit executable. The problem seems not to be the fact that it's a 32-bit executable on my amd64 platform because even when I got it working it was a 32-bit executable, but that there was a Makefile issue related to 64-bit.
Check with QemuThere was a moment when I was stuck with libsdl and libvncserver package problems: I installed them and before compiling again Xen I wanted to do some more checks: I read that running Qemu on the image would give a hint about where the problem is: if Qemu works I would have to search in Xen configuration or compile, if Qemu doesn't work I would have to check the required packages. So I installed qemu package and tried:
qemu -hda /bkup/winxp.img -cdrom /mmedia/os/winxp_oem.iso -m 512 -boot dI created winxp.img with
ddon a EIDE disk partition because I read something about qemu problems on SATA disks, I was not sure but I wanted to avoid any possible problems, so I used /dev/hda5. Instantly a window opened and Windows setup started; it hang up after copying all the files and setting up keyboard, regional settings, etc., I believe at the reboot time, so I shutted it down with
xm destroy winxpand tried to boot Windows from the image instead of the cdrom iso:
qemu -hda /bkup/winxp.img -cdrom /mmedia/os/winxp_oem.iso -m 512 -boot cA window appeared and Windows loaded without any problems. Then I recompiled Xen, rebooted and reconfigured: now Xen was working!